Stratus V 6624, Руководство по установке оборудования

Страница: 29 / 78

Inspecting the Cabinet and System
Unpacking and Positioning the Cabinet 1-17
Figure 1-14. Moving Cabinet Down Pallet Ramp
2. Check the cabinet and systems for damage, as the next section describes.
Inspecting the Cabinet and System
Check all equipment and components for damage by performing the following
procedure.
1. Open the rear door of the cabinet. From the bottom of the cabinet, remove and
discard the desiccant bags.
2. Check the cabinet and system for damage. Verify that the cabinets and panels
have no dents, scratches, or scrapes.
If you notice damage, contact the CAC.
Verifying the Stratus Serial Number
Find the equipment label to check the Stratus serial number. To find the equipment
label, open the rear door of the cabinet. The equipment label is affixed to the bottom
right of the door opening.
Figure 1-15 shows the equipment label.
upk011a