Stratus SAE-F10S, Инструкция по установке и эксплуатации

Страница: 3 / 24

3
1 - The main features of the equipment
1.1 - Product description
This product is a hydraulic lift. The product is manual single point lock release, easy to operate. It is suitable for in-
spection, repair and maintenance of a vehicles below 10000LBS.
1.2 - Features of the product
When the power unit of the hydraulic lift is connected to the power supply ,press the switch, the gear pump works,
and the hydraulic oil pushes the piston rod up, which is brought to the pulley and the pulley and the safety lock
tooth will blink and bite each other during each ascent. At the same time, to ensure that the hydraulic system will
not cause slippage.
1.3 - Satey mark of the product
Do not come under the vehicle during
operation. This can cause injury and
death.
Evacuate to a safe place instantly
the event that the vehicle tips. This
can cause injury or death.
Before lowering the lift, check that
there are no obstructions under the
vehicle or the lift arms.
Do not operate damaged equip-
ment.
When the vehicle is lifted, do not rock
it as this may dislodge it.
Only trained person may operate
the equipment. Inexperience can
cause accidents.
Do not lift a vehicle using on pair of
arms only. Do not operate the push button
except the worker.
Do not rock the vehicle when lifted. Do
not use a high pressure cleaner to the
vehicle lower part. To avoid being electrocuted, dis-
connected the main power before
opening the control panel.
To avoid injury, keep your feet clear of
the arms and carriages. Read and fully understand the man-
ual before using the lift.
Not allowed unauthorized persons in
the work area.
Before going under the lift. Make
sure that the safety pawls are en-
gaged.
Position vehicle with center of gravity
midway between adapters.
Make sure that the front and back
balance when placing the car, oth-
erwise the car will fall.
Do not modify the control panel or the
safety functions as this may impair
their function.