Stratus SAE-F10S, Инструкция по установке и эксплуатации

Страница: 16 / 24

16
6 - The maintenance and inspection of the equipment
Pos
.
Name Methods Period
1 Arm Safety lock tooth
Manually check the occlusion of the arm safety lock tooth
and whether they can be completely locked.
Every day
2 Spiral pad combination Check the rubber pad, clean and replace also. Every day
3 Column safety lock combination
Check the cooperative relationship between the safety lock
and the carriage.
Every day
4 Cylinder and hose connectors Before using the lift, check for oil leakage. Every day
5 Control button Check whether the button ”press to run, hand off and stop”. Every day
6 Limit Switch
Press the hydraulic power unit’s button, the lift rises, and
when the carriage hits the limit switch, it stops rising.
Every day
7 Unlock the thin wire rope
Check the synchronization and tightness of the safety lock of
the main and auxiliary columns connected with the thin wire
rope.
Every day
8 Wire rope
Check the synchronization and tightness of the wire rope,
use No
.
1 lithium base grease for lubrication
.
Every day
9
Steel wire rope wheel and chain
wheel Check if the rope & chain wheel lubricated and the circlip is
in the groove. Every three
months
10 Slider platform running track
The sliding table running track is lubricated with No.1 lithium
- based grease, and there is no obstacle on the running track.
Every three
months
11 Chains and chain pins
Chains and chain pins are condition of the expansion bolts
and the ground. If there is a crack, replace it. Every three
months
12 Anchor bolts
Check the condition of the expansion bolts and the ground, If
there is any looseness, deal with it urgently. Every three
months
13 Overall
The rated load or no - load lift lifts several rounds, the lift
should operate stably without abnormal noise.
Every three
months
14 Hydraulic Oil
Replace the hydraulic oil within 6 months of first use, and
then once a year.
Every year