Stratus ftServer V 2302, Руководство по планировке объекта

Страница: 11 / 80

Site Planning for ftServer V 2302, V 4304, and V 6308 Systems 1-1
Chapter 1
Site Planning for ftServer V 2302,
V 4304, and V 6308 Systems
1-
For an overview of required information and tasks you need to perform to prepare a site
for ftServer V 2302, V 4304, and V 6308 systems, see:

“Site Planning Overview” on page 1-1

“Site Planning for Fault-Tolerant Systems” on page 1-2

“Planning for Cables” on page 1-3

“Site Planning Checklist” on page 1-5

“Preparing to Install a System” on page 1-7

“System Documentation” on page 1-9

“Safety Notices” on page 1-10
Site Planning Overview
Site planning for fault-tolerant systems includes:

Electrical power planning
Provide electrical power sources that meet the requirements of the system and
optional components, including the purchase of a qualified
uninterruptible power
supply (UPS) .

Space planning
Plan the location of the system and external components to accommodate the
lengths of the connecting cables.
Provide adequate space for the system or cabinet and for a desk or table to
accommodate components outside a cabinet. Also provide enough space for
servicing the systems and components.
Provide an environment that meets the system's requirements for ambient
temperature and air quality.