![Stratus cerillo Скачать руководство пользователя страница 1](http://html.mh-extra.com/html/stratus/cerillo/cerillo_quick-start-manual_1383751001.webp)
stratus
quick start guide
Step 1: Get Started.
Confirm receipt of all components and device
(shown at left). The microSD card may already
be installed in the Stratus. Download the Cerillo Device Man
-
ager onto your computer at cerillo.bio/software. Then con
-
nect your device to your computer, open the Cerillo Device
Manager Software, then open the settings window to set up
your device.
Step 2: Location.
Place your Stratus where you’d like to measure.
This is anywhere your samples will be happy—incubator, an
-
aerobic chamber, benchtop, hood, etc.
Step 3: Power the Device.
First, insert the microSD card. Then, plug the power adapter
into a standard wall outlet, and the USB cable into the power
adapter and the Stratus. Alterativly, you can use a computer
or battery pack to power your device.
Step 4: Allow for Equilibration.
The Stratus needs 60 minutes to equilibrate to new
environmental conditions. This can be a good time to
do your experimental prep work.
Step 5: Go!
(See reverse.)
Have a question? Email [email protected]
Your new Stratus is an LED-based
plate reader used to measure optical
densities in standard plate formats.
2. microSD card
1. stratus
3. USB cable
4. power adapter