Finished size:
1850mm high x
900mm wide x
450mm deep.
C
M
Y
CM
MY
CY
CMY
K
Finished size:
1850mm high x
900mm wide x
450mm deep.
C
M
Y
CM
MY
CY
CMY
K
Slide Front Panel into the two sides and click into place.
FITTING FRONT
PANEL TO SIDE
PANELS
Step 3
A
B
THANK YOU FOR PURCHASING YOUR EXTRA LARGE METAL CABINET.
Each shelf can hold a maximum load of 45kg. Please carefully read and follow these
instructions to assemble your cabinet.
ENSURE PROTECTIVE EYEWEAR AND GLOVES ARE WORN WHEN ASSEMBLING THIS UNIT.
CHECK PARTS LIST
1 x Front Panel (Doors & Frame)
2 x Plastic Covers
10 x Screws
16 x Shelf Supports
2 x Keys
2 x Side Panel
3 x Shelves
(have folded edge)
1 x Floor Panel
1 x Top Panel
1 x Rear Wall
(install this way up & face
detail towards inside of cabinet)
FITTING AND
SECURING
TOP PANEL
Step 1
Step 4
A
B
Position the Right Side Panel
next to the Rear Wall.
Locate the Top Panel - the front has the ‘push-through’ slots.
Lift the Top Panel into place from the inside.
JUN 2022
Fasten to the Back Panel with 3 x screws. Then, use a screwdriver to
push the ‘push-through’ slots shown at ‘A’ into the Front Panel.
View from above of
how they slot together.
Secure with screws to hold
side and rear together.
Repeat with other side.
FITTING AND
SECURING REAR
WALL TO SIDES
Step 2
A
B
C
D
HW-12937
1
EXTRA LARGE
METAL CABINET
FOR INTERNAL USE ONLY
TOOLS REQUIRED:
• Rubber Mallet
• Phillips Head
Screwdriver
