•
BEFORE YOU START
•
COMPONENTS & ACCESSORIES
•
TOOLS REQUIRED
•
INSTALLATION
•
GUTTER STYLES
•
REMINDERS
When your material has arrived on site, check each piece
against the cartnote supplied. Carefully read this leaflet
to ensure that you are familiar with all the steps involved.
Ensure you have adequate tools for the job.
BEFORE YOU START
GUTTERS
TOPICS COVERED INCLUDE
TOOLS REQUIRED
YOUR COmPLETE GUIDE TO INSTALLING
STRATCO GUTTERS AND DOwNPIPES.
•
HACKSAW
•
TAPE MEASURE
•
TIN SNIPS
•
RIVET GUN
•
DRILL / DRILL BITS
•
SPIRIT LEVEL
•
STRING LINE
Stratco has designed an extensive choice of gutter styles, from
the more traditional colonial styles to today’s modern
contemporary designs. Most of Stratco’s gutters have the
revolutionary suspension rib. This enables the gutter if used
with either Clickfast®, or Clickform™ steel fascia, to be fixed
with the Stratco Suspension Clip, the system which has proudly
received an Australian Classic Design Award. When using timber
fascia the suspension rib can be used with timber fix clips.
Stratco Gutters and Downpipes are both fashionable and functional accessories, that enhance the look of your
home and minimise the risk from water damage. Stratco offer a range of quality gutter and downpipe products
and all the advice and tools you need to do a competent job for yourself. Do not underestimate the damage poor
gutters and downpipes cause, take these handy tips and replace them now. For information on installing High
Fronted Gutters please refer to the Stratco ‘High Fronted Gutters Information Guide’ on the Stratco website.
•
HACKING KNIFE
•
HAMMER
•
SILICONE
•
WALKING PLANKS
•
RIVETS 1/8”X1/8”
•
30mm GALV. CLOUTS
•
LADDERS & SCAFFOLD
Note: Many gutters are available slotted to prevent overflow
water from entering the eaves. Check with your local Stratco
office to confirm if this is available in your gutter profile.
•
VFC AND VC SQUARE
FASCIA GUTTER
•
125D (QUAD) GUTTER
•
150 HALF ROUND
GUTTER
•
OG GUTTER
•
CLICKFORM EAVES
GUTTER
•
150 SMOOTHLINE
GUTTER
Gutters & Downpipes
