Objet260 User Guide
5 Using Objet Studio
DOC-37004 Rev. E
5-58
an option that enables Objet Studio to print the tray by the most efficient
method (see "Printing-Mode Selection" on the next page).
E-mailing
Objet Digital
Files
You can easily e-mail
objdf
files using Microsoft
®
Office Outlook
®
. Sending
objdf
files is recommended (instead of
stl
files) because the size of a file is
typically reduced by more than half. An added benefit is that the
objdf
file
contains the model-material information for the object.
To e-mail a file:
1. From the
Tools
menu, select
Email Objet Digital File
.
Outlook opens with the file attached and
Subject
details added to the
e-mail form.
2. Enter the e-mail address and send the file.
Printing the
Tray
When a tray is ready to be printed, it is placed in the Jobs Queue. When the
job reaches the head of the queue, Objet Studio pre-processes the tray file to
create slices, and feeds them to the printer.
To send the tray to the print queue:
1. On the
Tray Settings
ribbon,
Build Process
group, click
.
❒
If printing the tray requires two or more model materials (Digital
Material mode), the
Job Summary
dialog box opens.
Figure 5-73
Job Summary when printing with multiple model materials
Note:
The values displayed are the result of a quick calculation, and
represent a rough estimate of the materials and time input required to print
the job. For a more accurate calculation, click Fine Estimation.
Continue with step 4
.
