Objet260 User Guide
5 Using Objet Studio
DOC-37004 Rev. E
5-30
5. Click
Apply
.
Note:
When you de-select objects, they are displayed, by default, with colors
representing the model-material. Even after adding a coating to an object, its
color remains that of the main material, not the color of the coating material.
To inspect, modify or remove the coating applied to an object:
1. On the "Model Toolbar" or the
Model Settings
ribbon, click
.
The
Coat with
dialog box opens.
2. Perform one of the following actions—
❒
Change the coating settings, and click
Apply
.
❒
To remove the coating, clear the
Coat With
check box and click
Apply
.
❒
To keep the current coating settings, click
Apply
or
Cancel
.
Positioning Objects on the Build Tray
To produce models efficiently and with the required finish, it is important to
carefully position objects on the tray. Objet Studio supports the automatic
positioning of objects. However, you should check to make sure that the
objects are orientated optimally for your needs, according to the
considerations explained in "Manual Positioning" on page 5-33.
Two things that affect the positioning of objects on the tray are
orientation
and
placement
. You can let Objet Studio determine the optimum orientation
and position, or you can control them.
Automatic
Orientation
By default, Objet Studio automatically orients objects, when placed on the
build tray, for the shortest printing time. (You can later change the
orientation manually.) However, you can cancel automatic orientation when
placing an object on the build tray.
To place an object on the build tray without automatic orientation:
➢
In the
Insert
dialog box, make sure
Orient Automatically
is
not
selected.
