Objet260 User Guide
6 Operating and Maintaining the Objet260 3D Printer
DOC-37004 Rev. E
6-31
11. Remove all tools and cleaning materials from the printer, and close the
cover.
12. Confirm this in the wizard screen, and click
Next
.
Figure 6-32 Confirmation screen
13. Click
Done
to close the wizard.
Pattern Test
The pattern test is the basic verification of the printer’s ability to produce
quality models, since it demonstrates the condition of the nozzles in the print
heads. Make sure, therefore, that you perform this test weekly, and whenever
you suspect a printing problem.
To perform the pattern test:
1. Make sure that the build tray is empty.
2. Prepare a sheet of pink paper—A-4 or Letter size.
3. In the printer, tape the pink paper to the center of the build tray.
Figure 6-33 Paper positioned for pattern test
