Stratasys Objet260 Connex Скачать руководство пользователя страница 13

Страница: 13 / 224

Objet260 User Guide

2 Safety

DOC-37004 Rev. E

2-2

Safety Features

Stratasys 3D printers are designed to comply with CE and FCC
standards. They are equipped with the following safety features:

Cover Interlock Switch

The power supplied to the UV lamp(s), the tray heater and the
motion motors is turned off when the cover is opened.

Warning

Do not defeat (override) the interlock switch.

Doing so could

result in serious personal injury. If the interlock switch does not
function correctly, do not use the printer, and contact your service
provider.

Safety Lock

The cover is locked while the printer is working. If you do
manage to lift it, the UV lamps and the motion motors turn off.

Warning

Do not defeat (override) the safety lock.

Doing so could result

in serious personal injury. If the safety lock does not function
correctly, do not use the printer, and contact your service provider.

UV Screening

The transparent section of the cover blocks harmful UV
radiation, allowing the operator to view the model as it is being
made.

Figure 2-1

Front view of the Objet260 printer

Circuit Breaker

The power to the printer is turned off in case of electrical
overcurrent.

Note:

The circuit breaker is only accessible to service

personnel.

UV-Lamp Overheating
Protection

The power supplied to the UV lamp and the motion motors is
turned off if the temperature around the lamp reaches 90°C
(194°F). A label on the UV-lamp cover indicates if the
temperature has exceeded 65°C (150°F).

Содержание Objet260 Connex

































































































































































































































Результаты поиска

Содержание Objet260 Connex

Отзывы:

Бренды по названию

Популярные бренды

Stratasys Objet260 Connex, Руководство пользователя

Результаты поиска

Содержание Objet260 Connex

Отзывы:

Бренды по названию

Популярные бренды