Materials Handling and Storage
Printing Materials
Printing materials should be stored indoors, in a dry area with adequate ventilation. The following table
lists general requirements for storage, inventory control, and disposal.
Topic
Requirement
Storage
15°C to 27°C (59°F to 81°F)
Inventory control method
First In First Out (FIFO)
Disposal
In compliance with local regulations
Table 7 Requirements for hazardous materials
These specifications are applicable for most printing materials. Requirements for handling and storing
specific materials appear in the Material Safety Datasheet (MSDS) included with each material.
Note:
•
Non-compliance with these recommendations might result in reduced shelf life.
•
Disposal of all liquid and solid waste, cleaning cloths, gloves, and empty material
containers must be done in accordance with local laws and regulations.
Cleaning Solvent
One liter of isopropanol (IPA) or ethanol (ethyl alcohol) should be available at all times for cleaning
purposes.
The customer is responsible for ensuring that the material storage area complies with local regulations.
Stratasys J826
Materials Handling and Storage
DOC-18005 Rev. E
©
2019-2020 Stratasys. All rights reserved.
19
