Stratasys Fortus 250mc, Руководство по подготовке площадки

Страница: 5 / 12

1
ABOUT THE FORTUS 250MC
The Fortus 250mc printer incorporates the latest in innovative technologies to provide you with precise
prototypes from a CAD design. Three-dimensional parts are built by extruding a bead of ABS plastic through a
computer-controlled extrusion head, producing high quality parts that are ready to use immediately after
completion. With three layer resolution settings, you can choose to build a part quickly for design verification, or
you can choose a finer setting for higher quality surface detail.
COMPONENTS
•
The 250mc Printer
• Insight Software Package
HIGHLIGHTS
• Maximum build area of 10 x 10 x 12 inch (254 x 254 x 305 mm)
•
Material Canister Bays: 1 model, 1 support
• User Interface with Display Panel and Keypad
HOW TO USE THIS GUIDE
This guide provides information for selecting an appropriate location for the Fortus 250mc. Information of
particular importance is presented in one of three formats:
Warning: A WARNING indicates a procedure that may cause injury to an operator
if the procedure is not followed. A WARNING will precede the paragraph of
instruction to which it relates.
Caution: A CAUTION indicates a procedure that may cause damage to equipment
if the procedure is not followed. A CAUTION will precede the paragraph of
instruction to which it relates.
Note: A NOTE is used to highlight a specific point or to provide an operational tip.
While useful, a NOTE does not indicate a procedure that can cause injury or
damage if it is not followed. A NOTE will follow the paragraph of instruction to which
it relates.