Stratasys Eden350V, Руководство пользователя

Страница: 75 / 182

DOC-03050 Rev. A
5–39
Eden350V User Guide
Production
Estimates
Objet Studio enables you to calculate the time and material resources
needed for producing trays before sending them to the printer. The time it
takes Objet Studio to perform this calculation depends on the number of
objects on the tray and their complexity. Calculating the production
estimate for a full tray could take up to 15 minutes, depending on your
computer’s specifications.
To calculate the time and materials needed for producing the current
tray:
¾
On the Tray Settings ribbon, in the Build Process group, click .
While the estimate is being calculated, a progress bar is displayed—on
the right side of the status bar (at the bottom of the screen).
Figure 5-54: Estimate progress bar
When Objet Studio finishes calculating the production resources, the
results are displayed in the Estimated Consumptions group on the Tray
Settings ribbon.
Figure 5-55: Production resource calculation
E-mailing
Objet Digital
Files
You can easily e ‐ mail objdf files using Microsoft
®
Office Outlook
®
. Sending
objdf files is recommended (instead of stl files) because the size of a file is
typically reduced by more than half. An added benefit is that the objdf file
contains the model ‐ material information for the object.
To e-mail a file:
1. From the Tools menu, select
Email Objet Digital File
.
Outlook opens with the file attached and Subject details added to the
e ‐ mail form.
2. Enter the e ‐ mail address and send the file.
Cancel