Stratasys Eden350V, Руководство пользователя

Страница: 26 / 182

Introducing the Eden350V 3D Printing System
3–6
DOC-03050 Rev. A
Safety
Considerations
Before being cured, resins are hazardous materials. To prevent possible
health hazards, follow these precautions regarding printing materials:
•
Do not expose to flames, heat or sparks.
•
Prevent contact with skin and eyes.
•
Ventilate areas where they are handled.
•
Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
Disposal
Dispose of cartridges of model and support material in accordance with all
applicable laws and regulations. If necessary, the cartridges can be
disassembled for recycling.
Work Environment
Extreme heat and humidity conditions can adversely affect the operation of
the Eden 3D printer. Use ventilation or air ‐ conditioning systems, if
necessary, to keep the work area within the following ranges:
•
18
°
–25
°
C (64
°
–77
°
F)
•
30%–70% relative humidity
You can find more safety information about resins in “Safety Guidelines” on
page 2-4, and “First Aid for Working with Printing Materials” on page 2-6.