Stratasys Eden350V, Руководство пользователя

Страница: 153 / 182

DOC-03050 Rev. A
6–47
Eden350V User Guide
Installation
Problems
If the printer detects that there is a problem after you install print heads,
relevant warning screens appear.
¾
If the printer software does not detect the replaced head, the following
warning screen appears.
Figure 6-71: Incorrect-installation screen
If this happens:
a. Open the print head compartment (see figure 6 ‐ 60 on page 42).
b. Re ‐ insert the print ‐ head driver card into its socket (see figure 6 ‐ 64
on page 44).
c. In the wizard screen, select the check box to confirm that you have
re ‐ inserted the card, and click
Next
.
¾
If the replacement head was not factory ‐ calibrated, the following
warning screen appears.
Figure 6-72: Invalid-data warning screen
If this happens:
a. Remove the head and replace it with another one (starting with
step 8 on page 42).
b. In the wizard screen, select the check box to confirm that you have
installed another print head, and click
Next
.
c. Contact your authorized Customer Support center about the
unformatted head.