Eden260V User Guide
5 Using Objet Studio
DOC-32020 Rev. F
5-49
Displaying the Cross Section of Objects
The
Section
feature enables you to view the interior of an object by “slicing” it on
any axis. You can then manipulate the object to inspect the interior from different
angles. This may be important for deciding on the type of support necessary
when producing the model (see "Choosing the Support Strength" on page 5-47).
Displaying an object’s cross section only affects how the tray is displayed on the
screen; it does not change the object itself.
To display a cross section of the tray:
1. From the
Tools
menu, select
Section
.
The
Section
dialog box opens.
Figure 5-57
Section
dialog box
2. Select
Enable Clipping
.
3. Use the slider controls for the X-, Y-, and Z-axes to cut the tray so that you
see the cross section you want.
Figure 5-58
Left:
Whole view;
Right:
Cross section view after using the
Z-slider
