Eden260V User Guide
5 Using Objet Studio
DOC-32020 Rev. F
5-36
Tray Perspective
The default perspective of the build tray is “isometric.” You can change the
perspective of the active window with one of ten options.
To change the perspective of the build tray in the active window:
1. On the
Tray Settings
ribbon, open the
Perspective
flyout toolbar.
Figure 5-39
Perspective
toolbar
2. Click the icon that represents the desired perspective.
Tray Positioning
To view the tray and models from different directions, you can move the tray
around the screen and change its display angle.
To move the tray in the Objet Studio screen:
➢
Press the mouse wheel while moving the mouse.
Figure 5-40 Tray after moving it in the Objet Studio display
