Stratasys Eden250, Руководство пользователя

Страница: 25 / 122

DOC- 22000 Rev. A
3–5
Eden250 User Guide
Work Environment
Extreme heat and humidity conditions can adversely affect the operation of
the Eden 3 ‐ D printer. Therefore, it is recommended that you use ventilation
or air ‐ conditioning systems, if necessary, to keep the work area within the
following ranges:
•
18
°
–25
°
C (64
°
–77
°
F)
•
30%–70% relative humidity
Workstation Requirements
Preparing Files for Use with Eden 3-D Printing Systems
Before using files with Eden 3 ‐ D printing systems, you must convert them
in your CAD program to either STL files or SLC files. (For an explanation of
these file formats, see “Source Files ” on page 3 ‐ 3.)
After converting the model files, it is recommended that you check them for
defects in an STL ‐ repair application (such as Magics, by Materialise) before
opening them in Objet Studio and producing the model.
Converting
CAD Files to
STL Format
This procedure may vary slightly, depending on the CAD software used,
but the following instructions generally apply.
To convert a file to STL format (in a CAD program):
1. From the
File
menu, select
Save As
.
2. In the
Save As
dialog box, open the
Save As Type
pull ‐ down menu and
select
*.STL
.
Server/
Stand-alone Station Client Workstation
Processor
Pentium 4, 3.0 GHz (min.) Pentium 4, 3.0 GHz (min.)
Operating System
Microsoft Windows XP or
Windows 2000
Microsoft Windows XP or
Windows 2000
Graphics Card
Supporting open GL,
with 256 MB of memory
Supporting open GL,
with 256 MB of memory
RAM
2 GB (min.) 1 GB (min.)
CD Drive
IDE CD ROM IDE CD ROM
Hard-Disk Drive
40 GB (min.) 40 GB (min.)
Network Adaptor
Card
2 x LAN TCP/IP 1 x LAN TCP/IP
Communications
Cable
Crossed connection (1)
Standard cable (1)
Standard cable