Stratasys Eden250, Руководство пользователя

Страница: 103 / 122

DOC- 22000 Rev. A
7–27
Eden250 User Guide
8. Open the Single Head Replacement kit, and remove the safety gloves
and the instructions.
9. Put on the safety gloves.
10. When the Head(s) Replacement wizard screen is displayed, open the
Eden printer cover to remove the defective printing head.
Note: The Eden printer disconnects power to the heads for your safety.
Figure 7-38:Replace the defective head when this screen appears
Removing the
Defective Head
11. On the print block, release the upper and lower screws that secure the
printing head in the block. (If necessary, you may use a screwdriver to
loosen the screws.)
Figure 7-39:Releasing the locking screws