•
This appliance should only be placed on a
fl
at,
fi
rm surface.
•
Choose a dry and well-v
ated space.
•
The appliance should be po oned so that the plug is easily accessible.
Before Switching On
•
Before using your appliance, add a teaspoon of bicarbonate of soda to warm
water and with a damp cloth wipe down all parts of the new appliance, then
repeat the process with a clean damp cloth and dry.
(ensure the appliance is
not connected to the power when performing this task).
•
Remove all transport tapes and foam prote on pieces . Clean the interior with
a cloth dampened in lukewarm soap and water. Wipe with clean water and
wipe dry.
•
There may be an odour when you
fi
rst switch on the appliance, it will disappear
when the appliance starts to cool.
•
When the appliance has been po oned, adjust the feet to ensure the unit is
stable. This is es
l to ensure quiet running and proper door opening
/closing.
•
Connect to the electrical socket but do not switch the power to the refrigerator
on for at least 3 hours. The coolant within the product needs me to se le
it has been transported and put in to po on, failure to do this will
affect
the
cooling performance of your appliance.
•
Once the appliance has se led switch on the power, the compressor will begin
to work. Locate the control panel and set the temperature of the fridge
compartment to 4°C and the freezer compartment to -18°C. Close the door
•
You may hear faint gurgling or bubbling sounds when the refrigerant is pumped
to the cooling system and through the coils or tubing at the rear of the
appliance. When the compressor is in op
on you may hear a slight whirring
sound or pu
ng noise. The thermostat controls the op
on of the
compressor, and you may hear a slight click as it cycles in and out (this is
normal).
•
To save energy, you should minimize the frequency and du
on of door
opening.
6
Содержание ST SXS909WTD Sta
Страница 1: ...ST SXS909WTD Sta 08xxxx ...
