manualshive.com logo in svg

Storz OR1 FUSION WO300, Инструкция по эксплуатации

Поделиться
Скачать
Storz OR1 FUSION WO300 Скачать руководство пользователя страница 40

Operation

Instructions for use • KARL STORZ OR1 FUSION

®

, Rel. 1.4.2 • JEB924_EN_V1.0_02-2021_IFU_CE-MDR

40

2.

Adjust the brightness and contrast.

3.

Activate the 

2D

 checkbox if interlaced artifacts occur in a still from an analog source.

ð

The changes appear in the preview window.

4.

Save the changes with 

Save

 or discard them with 

Reset

.

6.6.5 Finish

The created documentation is saved in the 

Finish

 module. Depending on the configuration,

data storage is performed automatically or manually. To ensure that the documentation can be
saved, all mandatory fields must be completed. Editing of the safety checklist is optional.

The user is responsible for using and managing removable storage devices.

1.

Touch 

Finish

 in the main menu.

ð

If mandatory fields are missing, the following window appears:

ð

If automatic data storage has been configured, a list of the documentation to be saved
appears.

ð

If destination directories have been configured for manual saving, a selection of
destination directories appears:

Содержание OR1 FUSION WO300

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды