Storz C-MAC S, Инструкция по эксплуатации

Страница: 13 / 28

Preparation
Instructions for use • C-MAC S PEDIATRIC IMAGER • PNO713_EN_V1.0_03-2021_IFU_CE-MDR 13
The C-MAC monitor 8403ZX/8404ZX enables two KARL STORZ CMOS video units to be
connected with Lemo connectors. Video units from other manufacturers cannot be
connected. If two cameras are connected, the user must select the camera for which the
images are to be displayed in the menu (refer to the instructions for use for the C-MAC
monitor 8403ZX/8404ZX).
5.4 Connection to the C-MAC pocket monitor
The C-MAC S PEDIATRIC IMAGER can only be connected to the C-MAC PM 8403 XD.
The 8401 XD model is not compatible.
1. Connect the C-MAC PM to the connection socket on the C-MAC S PEDIATRIC IMAGER.
The orientation pin on the plug of the C-MAC PM and the socket of the video
laryngoscope blade facilitates connection.
2. Make sure that the C-MAC PM plug is fully inserted. There must not be a gap.
The monitor can also be opened up when connecting both components.
The devices are now ready for use. Once the C-MAC PM has been opened up, the TFT display
will be activated and the multifunction button on the C-MAC S IMAGER will light up blue.
As soon as the multifunction button on the C-MAC S PEDIATRIC IMAGER lights up blue, a
blue information bar will appear on the C-MAC PM monitor for a few seconds. It is now
possible to record images and videos.
5.5 Connection to the C-HUB II
The C-MAC S PEDIATRIC IMAGER can only be connected to the C-HUB II 20290301
(software version 721v105 or later). Older models are not compatible.