background image

Disconnect

Reset Settings

Vibration 

Vibration 

Alarmtones

Charge Indicator 

Smartphone

CRAFTY

LED Brightness 

SETTINGS

Temperature

Settings

Information

CRAFTY

31 

30 

Vibration Smartphone: 

Here, in addition to the vibration of the 

CRAFTY

 Vaporizer, the vibration of the 

smartphone can also be switched on 

and off here. 

Smartphone Alarm Tone:  

Any alarm tone of the smartphone can 

also be switched on and off here in par-

allel with the vibration of the CRAFTY 

Vaporizer. 

11.6.  Menu Items for Device and 

Information  

Device:

Here you find device-related informa

-

tion, such as operating hours, soft-

ware versions etc.

Information:

Here you find further information such 

as lists of plants and prices, but also di-

rect links to the Storz & Bickel website 

or to the online shop.

the charging, the LED indication lights 

up for a moment on red/green/blue 

and the Vaporizer vibrates briefly. This 

serves as a functional check and indi-

cates that the charging operation has 

started. 

Vibration CRAFTY: 

The vibration motor of the CRAFTY 

Vaporizer can be switched on and off 

here. 

Reset to Default Settings: 

The default settings (see Chapter 11.1. 

“Default Settings”, page 27) can be 

restored here.  
The following settings / values are re-

stored to the default settings: 

 Set temperature 
 Booster temperature 
 LED brightness 
 Charge Indicator Lamp 

Vibration 

CRAFTY  

 Vibration smartphone 

 Smartphone alarm tone

Connect to other CRAFTY: 

 

If another CRAFTY

 Vaporizer is to be 

controlled by the same smartphone, 

the previous connection can be dis-

connected so that the serial number 

of the other CRAFTY

 Vaporizer can be 

entered. 

11. C R A F T Y A PP

11. C R A F T Y A PP

11.5. Further individual settings 

The booster temperature is always 

added to the basic temperature. But 

the total cannot exceed 210°C (410°F).   

Fahrenheit/Celsius 

If you simultaneously tap on the plus 

button and the minus button, the dis-

play changes from degree Celsius to 

degree Fahrenheit and vice versa. 

Charge Indicator Lamp 

The charge indicator lamp shows a 

battery symbol with six fields indicat

-

ing the charging status. If the battery is 

almost discharged, the battery frame 

to flash; if fully charged, the frame and 

all six fields are visible. 
The  number  of  status  fields  visible 

depends on the extent of the battery 

charge.
During the charging of the CRAFTY 

Vaporizer,  the  charge  indicator  lamp 

flashes and shows the current level of 

charging.

Settings

Charge Indicator Lamp

LED Brightness CRAFTY: 

The brightness of the LED indica-

tor on the CRAFTY

 Vaporizer can be 

dimmed using the slider control. 

Charge Indicator Lamp CRAFTY: 

Here, the blue lights of the LED indi-

cator can be switched on and off dur-

ing the charging operation. When the 

power adapter is plugged in to start 

Содержание Crafty






















Отзывы: