EN
6
4.
Assembling your scooter
1. Unfold the scooter by pushing the stem forwards
until you hear a click. Afterwards, unfold the kickstand
to support the scooter.
2. Install the handlebars by turning each handle
towards the rider (se illustrations). Left (L) handlebar
must be turned clockwise, whereas the right (R)
handlebar must be turned counterclockwise.
NOTE!
You risk damaging the thread of the handlebars
if you force the initial alignment. The handlebars should
turn smoothly and fit snugly.
Dashboard (Display) Settings:
The power button is multi-functional. You switch
between functions by pressing the power button for a
certain time or short clicking interval.
Power on:
Press and hold the power button for
0.5 seconds.
Power off:
Press and hold the power button for 2
seconds.
Switch speed modes
: Single click the power
button.
Lights (front and rear):
Double click the power
button.
3. Verify that your scooter powers on and the battery-
capacity is high.
