StormPro
®
BA
Series
Sump Pump
OPERATION MANUAL
Dated: 02/15/2013
Document Name: StormPro_BASeries_OM
Page 1 of 8
Register your product at www.sumpro.com
I
ntroductIon
Thank you for purchasing a StormPro
®
sump pump.
Take the time to read the instructions carefully before
using this appliance. We strongly recommend that
you keep this instruction manual in a safe place for
future reference.
Check the nameplate for your pump’s specification,
refer to the table list.
Be careful not to exceed the given specifications in
the use of your pump.
M
arks
& M
eanIngs
DANGER:
Keep the pump equipment out of
the reach of children! Warns that the failure to
follow the directions given could cause serious risk to
individuals or objects.
WARNING:
This sign warns the operator that
the failure to follow an instruction may damage
the pump and/or the system.
L
IMItatIons
This pump series is suitable to pump water and also
can be used both for permanent and temporary
installation.
The pump can be placed in a sump pit that means
it could pump rain water containing suspended solid
particles no larger than ¼" in diameter.
Total Dynamic Head (Ft)
Capacity (GPM)
40
35
30
25
20
15
10
5
0
0
10
20
30
40
50
60
70
80
90
1/3HP
1/2HP
3/4HP
Model
Output
Discharge
(inch)
Rated
Maximum
Dimensions
L x W x H
Weight
(lbs)
HP
Amp
Head (feet)
Flow (GPM)
Head
Flow
BA33
1/3
4.5
1.5
10
50
0 GPM @ 25'
68 @ 0'
7-5/8 x 5-1/2 x 12-1/2"
16
BA50
1/2
5.8
2
10
61
0 GPM @ 29'
78 @ 0'
8-3/4 x 5-3/4 x 13-5/8"
24
BA75
3/4
7.5
2
10
74
0 GPM @ 37'
98 @ 0'
8-3/4 x 5-3/4 x 14-1/2"
25
Available Ion™ Switch, suffix i, or SPI switch, suffix spi, configurations. *Add 3-13/4" to width for Ion™ Switch.
