Storch Kamine SIC 700 S, Руководство пользователя

Страница: 31 / 31

31
Gültig seit/Valid from/Valide: 09.10.2019

All electrical work for connection and installation must be executed in accordance with
relevant valid national and regional standards and regulations, and in compliance with the
provisions of the local electricity supplier.

Electrical installation, placement into operation, maintenance and repairs of electrical
components may only be carried out by a qualified specialist according to this manual.

The power supply cable may only be replaced by the manufacturer, their maintenance
engineer or a person with similar qualifications.

The power supply cable may only be replaced using a cable with the same type of insulation,
i.e. with the same or a higher heat resistance and corresponding conductor diameter.

The electrical device is delivered as an accessory to STORCH fireplace stoves and must not be
damaged in any way.

During installation of SIC 700 SMART , repair, or replacement of electric parts, the equipment
must be disconnected from the electric mains.

This device is not designed for use by persons (incl. children) whose physical, sensory, or
mental disability, lack of experience or knowledge prevents them from using the equipment
safely, unless they are under supervision or unless they have been instructed by the person
responsible for their safety in how to use the device safely.

Children must be kept under supervision to ensure they do not play with the device.

Voltage fluctuations of more than 10% may damage the electric components of the fireplace
insert, therefore we recommend installation of suitable voltage surge protection.

Defects caused by incorrect connection to the mains are not covered by the warranty!
9 TECHNICAL SPECIFICATIONS

Control unit power supply: 24 V/DC, 50 Hz/3 VA

Control unit heat resistance: max 50 °C

Display panel heat resistance: max 50 °C

Control unit dimensions (incl. plastic casing): 135 x 73 x 35 mm (h x w x d)

Disposal: the device should be disposed of as sorted waste

Cable mounting: connectors

Control unit ingress protection: IP 40
Software class: A (control functions do not affect device safety)