Storage Canopy C4020, Инструкция по сборке

Страница: 8 / 11

7
using screw M12x110
（
No.12
）
.There are 7 pieces of Connection Purlins (No.4) between each arch.
Then install the third arch into base plate and connect the purlins. Finally install the Diagonal tube
(No.17) using bolt and Clip (No.18). Assemble the Frame by turns like this.
C
—
ROOF COVER INSTALLATION
NOTE: DO NOT install the cover onto the frame of your building in high wind conditions. A
slight breeze is the most advantageous for cover installation. To take advantage of the breeze,
pull the cover up over the arches with breeze blowing in the cover like a sail filled with air.
1. Assemble Tensioning Tube for Roof Cover (No.5) before installing the cover.
2. Put the Roof Cover (No. 16) EVENLY, CAREFULLY AND SLOWLY on the frame. Adjust
the cover so that it is square and evenly centered on the frame.
.
Figure 5