3200 LUMEN
46 in. LED
SHOP LIGHT
MODEL No:
SL4YL3200N
PACKAGE CONTENTS
INSTALLATION INSTRUCTIONS
ADDITIONAL WARNINGS
5 YEAR LIMITED WARRANTY
This product is guaranteed against failure due to factory defects in materials or workmanship for five (5) years from the date of purchase. This
warranty is non-transferable and applies only to the original owner. Proof of purchase is required for repair or replacement. This warranty does
not cover normal wear of parts or damage resulting from any misuse of the product. Misuse of the product includes, but is not limited to:
washing the product, using in extreme weather conditions, opening the product, or trying to remodel the product. Important: this warranty is
only valid if the product has been purchased through an authorized reseller.
WARNINGS
WARNING:
Do
NOT
look directly at LED light sources.
This fixture is
rated for indoor use only.
WARNING:
Use only in 120v, 60Hz circuits.
WARNING: TO AVOID ELECTRIC SHOCK,
DISCONNECT POWER BEFORE INSTALLING
SAFETY AND PRECAUTIONS
1. Suitable for indoor use only.
2. Do
NOT
install over stoves.
3. Do
NOT
look directly at LED light sources.
4. The LED modules used in this fixture are not serviceable.
5
. This product is inspected prior to shipping.
Do not use if product is cracked, broken or missing parts.
6. Suitable for use in operating environments ranging between -4° to 104°F (-20° to 40° C).
7. Electrical requirements can be found on back of the fixture.
8. If unsure how to install a light fixture, call a qualified electrician.
9. Unplug cord from outlet prior to adding additional units.
• Shut off power to electrical outlet before installing or servicing this fixture.
CUSTOMER SERVICE
For questions regarding this product, please e-mail us at
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate the equipment. The user is cautioned that any changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found
to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the
equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or an experienced radio/TV
technician for help.
Revision Date: 10-08-2019
TROUBLESHOOTING GUIDE
CLEANING INSTRUCTIONS
Disconnect power to fixture before cleaning. Using a soft cloth, clean the fixture using a mild, non-abrasive glass cleaner. DO NOT use
solvents. DO NOT use cleaners containing abrasive agents. NEVER spray liquid cleaner directly onto the LEDs, fixture or wiring.
Before starting work to connect the fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Fixture does not turn on.
Problem
Probable Cause
Solution
Circuit breaker trips or fuse blows
when light is turned on.
1. Faulty switch.
2. Power is off.
1. Discontinue use
immediately.
1. Test switch or replace it.
2. Verify power supply is on.
1. Email customer service at
2. Call an electrician.
WARNING:
DO NOT alter or disassemble the fixture it is
completely enclosed and does not contain replaceable or
serviceable parts.
WARNING:
Before installation, plug in fixture to a
120v,
60Hz
electrical outlet to check for proper operation. Then, unplug and
begin the installation.
DIMMING
• DO NOT USE
THIS FIXTURE WITH DIMMERS.
Doing so will void the warranty of this product.
LED Facts:
Lumens: 3200
Color Temperature: 4000K (Bright)
LED Life: 50,000 hours
Operating Voltage: 120v
Cord Type: .18/2 SPT
Cord Length: 5 ft.
1
4
3
2
46 in.
117,5 cm
1.625 in.
4,13cm
CAUTION:
Personal injury can occur, along with damage
to the fixture and/or mounting surface may result if the
fixture is pulled from the surface. To prevent premature failure
from overheating, fixture should only be installed in
environments where the operating temperatures are between
-4° to 104°F (-20° to 40° C).
WARNING:
This product may represent a possible shock or
fire hazard if improperly installed or mounted. Products
should be installed following these instructions, local electrical codes
and/or the current National Electric Code (NEC).
WARNING:
The plug is fashioned to only fit in an outlet
one way. If it does not fit, rotate 180°. Never use with an
extension cord unless plug can be fully inserted.
DO NOT ALTER
THE PLUG OR CORD.
If it does not fit, contact a qualified
electrician. Never use with an extension cord unless plug can be
fully inserted.
DO NOT ALTER THE PLUG OR CORD.
2 in.
5,1 cm
Install the fixture before plugging it into an electrical outlet. Be sure to locate fixture within 5 ft. of the power supply.
INSTALLATION INSTRUCTIONS (CONT.)
FLUSH MOUNT INSTALLATION
OPERATION
1. Pull chain to turn ON and OFF
(Fig 12)
.
FOR DRYWALL INSTALLATION:
With a 3/16 in. drill bit, drill Holes for both anchors (included)
At the marked sites (
Fig. 2)
. Insert an anchor into each of the
pre-drilled holes.
2. Prepare the mounting surface by marking the two site locations for either the mounting screws or the hanger screws. The mounting
surfaces covered here are for wood or drywall.
CHAIN MOUNT INSTALLATION
Insert each screw into the prepared holes (from above) and carefully drive them (
Fig. 7)
. Attach the chains to the ceiling (mounting chains can
be mounted in ways not covered in these instructions) (
Fig. 8)
. Hang the “S” hooks onto the chain links that allow the fixture to be hung at the
desired height. Close of the top end of the “S” hook to attach it to the chain by carefully bending the top of the “S” hook with pliers (
Fig. 9)
.
Insert the bottom of the “S” hooks into the slotted holes on top of the fixture at each end
(Fig. 10). Caution:
The chains are only designed to
hold the weight of the fixture safely, do not hang items on fixture or cord.
4. Remove the protective film
attached to diffuser before
operating the fixture
(Fig. 11)
.
5. Insert plug into outlet.
Fixture is ready for operation.
FOR WOOD SURFACE INSTALLATION:
Using a 1/8 in. drill bit, drill pilot holes for both screws
(included) at the predetermined installation locations (
Fig. 3)
.
Fig. 6
Fig. 11
Fig. 12
1. The fixture can either be flush mounted or chain mounted. Determine the location the fixture is to be mounted. The screws need to be installed
43.75 in. apart
(Fig. 1)
.
Fig. 1
Fig. 8
Fig. 9
Fig. 10
1/8 in.
Insert each screw into the prepared holes (from above) and carefully drive them
in (Fig. 4)
, leaving a 1/8 in. gap between the mounting surface
and the bottom of the screw head (
Fig. 5)
. Insert both mounting screw heads into the large end of the keyhole slots atop the fixture (
Fig. 6)
.
Slide the fixture until both screw heads are completely captured by the narrow ends the keyhole slots. If the fixture feels loose, remove and
tighten screws a half turn, reinstall, repeate as needed.
Fig. 7
Fig. 3
Fig. 2
3/16 in.
1/8 in.
3. The fixture can be installed as a flush mount fixture or as a chain mounted fixture.
Fig. 4
Fig. 7
Fig. 5
2x
15 in. Hanging Chains
2x
“S” Hooks
2x
Mounting
Screws
2x
Wall
Anchors
2x
Hanger
Screws
SIDE
5 ft. 18/2 SPT Cord
7.5 in. Pull Chain
Keyhole Mounting Slots
Diffuser
43.75 in.
111,13 cm
