8
Control Panel Buttons
Power Button
The main power switch is used to apply or remove power from the power supply to the server system.
Turning off system power with this button removes the main power, but keeps standby power supplied
to the system. Therefore, you must unplug system before performing most maintenance tasks.
Reset Button
The reset button is located below the power button and allows you to manually reset the system.
Control Panel LEDs
There are four control panel LEDs that provide status information about the system.
Power LED
This LED Indicates that power is being supplied to the system's power supply units. This LED should
normally be illuminated when the system is operating.
HDD LED
Indicates activity on the HDDs or peripheral drives when flashing.
NIC 1 LED
Indicates network activity when flashing.
Information LED
Alerts operator of several states (See
