V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 14
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
2.3.
Configuring IPMI KVM
The Intelligent Platform Management Interface (IPMI) KVM configuration allows for
Remote
Management
and
Power Control
of the StoneFly DR365V system. This configuration is
optional to perform, but recommended.
To configure the IPMI module, connect a keyboard and monitor to the system. Power on the
system and press the
Del
key to enter the BIOS setup.
Navigate to
IPMI
tab and go to
BMC Network Configurations
: