All rights reserved by STONE Technologies
STAD133WT-15 Equipment Manual
Release 01/2019
9
2.11 4G Module
(Optional)
The mother board supports the 4G module of the MINI-PCIE interface. If
you need to use the 4G function, you only need to insert the module into
the mother board, then put the SIM card into the card slot to use the 4G
function.
The mother board card slot supports only the Micro SIM card.
The 4G module supports
TD-LTE/FDD-LTE/TD-SCDMA/WCDMA/EVDO/CDMA1X/GSM mode,
please refer to chart below and confirm with your network operator first.
Note: The SIM card is slanted to the outside.
2.12 GPS Module
(Optional)
The STAD133WT-15 is equipped with a GPS-enabled 4G module to
support fast and accurate positioning. If you need this function, you need
to put the GPS antenna in the open space. When you turn on the
Android positioning function, you can get the latitude and longitude
coordinates of the device at this time.
2.13 LED Interface
The STAD133WT-15 has two LED lights. The POWER light is the power
indicator. When the Android screen is normally powered, the POWER
light stays on. USR blinks when the system is running normally, and
always on when abnormal.
Supported Band
Frequency
TD-LTE
B34/B38/B39/B40/B41
FDD-LTE
B1/B3/B5/B8
TD-SCDMA
B34/B39
WCDMA
B1/B8
CDMA1X
BC0
GSM
900/1800MHz
