N420529A
EN
OUTDOOR UNIT FORMWORK KIT L01070II - L01071II - L01072II
Warnings
This instruction is an integral part of the booklet of the ap-
pliance on which is installed. Please consult this booklet
for general warnings and fundamental safety rules.
For a rapid and right assembly of the components follow
carefully the sequences described in the various sections.
All the operations must be performed by qualified person-
nel using the required Personal Protective Equipment.
Standard supply
The outdoor unit formwork kit for the built-in installation IN
and partial built-in installation PI consists of:
• 1 backrest
• 1 upper metal sheet
• 1 lower metal sheet
• 2 side metal sheets
• 3 supporting frame brackets
• 2 upper side brackets
• 2 upper centre brackets
• 2 tracks
• fixing screws
The formwork arrives disassembled, to be assembled dur-
ing installation.
1.
Backrest
2.
Upper metal sheet
3.
Side metal sheet
4.
Lower metal sheet
5.
Supporting frame brackets
6.
Upper side brackets
7.
Upper centre brackets
8.
Tracks
3
4
2
6
5
1
3
8
7
Match
Combination of outdoor unit formwork kit for installation of
built-in version IN and partial built-in version PI:
• L01070II - for models 5M, 7M
• L01071II - for models 9M, 11M, 11T
• L01072II - for models 13M, 13T, 15M, 15T
