Stone CF24E, Руководство оператора

Страница: 19 / 24

- 19 -
Maintenance
MAINTENANCE, LUBRICATION
AND ADJUSTMENT
To get long and trouble free service from your new
CF Power Trowel, it is essential to perform peri-
odic maintenance on engine and machine mecha-
nisms. Follow the guidelines listed below:
LUBRICATION
A. ENGINE CRANKCASE
Daily-- check oil level in engine. Engine warranty
is VOID if it is run without oil. Add oil as re-
quired to keep crankcase full. Engine oil should
be changed every 250 hours of operation, or once
a year, whichever comes first. See Lubrication
Specification section for engine.
Maintenance, Lubrication, Ad-
justment/Lubrication/Trowel
Gearcase/Arm Bearing
These oil requirements are general guidelines only,
for specific requirements consult the ENGINE
MANUAL included with the unit.
B. TROWEL GEARCASE
Daily-- check oil level in gearcase. Trowel war-
ranty is VOID if run without oil. Oil level should
fill the sight plug, located on the right side of the
gearcase, when the unit is at rest on a level sur-
face. Add oil as required to keep oil level at cor-
rect height. Gearcase oil should be changed ev-
ery 250 hours of operation, or once a year, which-
ever comes first. See Lubrication Specification
section when adding or replacing gearcase oil.
C. ARM BEARING
Monthly-- grease arm bearing through the grease
fittings in the spider. There are (3) fittings on (3)
arm trowels and (4) fittings on (4) arm trowels.
Pump grease into each fitting until clean grease
comes out of spider at either end, thoroughly clean
excess grease off from spider when all arms have
been greased. See Lubrication Specification sec-
tion for grease requirements.
D. THRUST BEARING
Weekly --grease with any grade 1 Lithium based
grease to purge out any dirt or water. Wipe off
excess grease. See Lubrication Specification
section for grease requirements.
Yearly --for bearing lubrication remove thrust
bearing and clean thoroughly. Inspect for
damage and replace if necessary or repack with
grease and reinstall. Refer to Spider Assembly
Removal section in your Parts/Service Trowel
Manual, P/N 56354 for spider removal.