1
Report 307-F-02b-2
Installation and Operation
Instructions
Stone Age Indoor Fireplace
1.0 Introduction
The following provides instructions for the installation
and operation of the Stone Age Fireplace, manufac-
tured by Stone Age Manufacturing, Collinsville, Okla-
homa.
Three generations of fireplace knowledge and experi-
ence have gone into the design and construction of the
New Age series fireplaces. New Age Fireplaces are
certified to UL127 for the US, and ULCS610 for Can-
ada. They are also certified in accordance with ICC-
ES AC156 meeting structural design requirements for
Earthquake Testing at a compliance level of Sds =
2.5g. The ICC-ES AC156 complies with 2010 Ameri-
can Society of Civil Engineers (ASCE) 7-10, 2009 In-
ternational Building Code (IBC), 2010 California
Building Code and 2012 ICC-ES AC156. Assembly
and Cutaway views of a NA42IND fireplace are shown
in Figure 1.
Because of structural modifications required in an ex-
isting home, it is recommended that this fireplace be
installed by a professional installer, or by a builder in
new construction. Installation by a non-qualified per-
son may negate the warranty.
Keep these instructions for future use.
2.0 Description
The fireplace is delivered as a kit with all components
necessary to complete the installation. The kit is con-
figured for a flue chimney, but a special adapter is
available for a metal chimney. Component arrange-
ment, some of which is optional, is shown in Figure 2.
Components are shown in Table 1. Specifications and
installation dimensions are shown in Table 2.
A completed installation should include the following:
A. Fireplace items shown in Figure 2 and listed in
Table 1.
B. Damper (sold separately) (Shown in Figure 11).
C. Chimney Cap (sold separately) (Shown in Figure
22).
D. Fireplace Grate (sold separately) (Shown in Fig-
ure 26).
E. Full firebrick (sold separately)
F. Stone Age Multi-Purpose Ready-Mix Cement
(sold separately).
The Stone Age Fireplace has been tested and listed in
accordance with UL 127 and ULC S610 standards for
indoor or outdoor use, and is listed by OMNI-Test La-
boratories, Inc. for installation and operation in the
United States and Canada as described in this manual.
This fireplace is designed to supplement your current
heating system. It is not designed to be used as a pri-
mary heat source.
Ensure that appropriate building permits required by
local codes are obtained before installation in an exist-
ing home.
Ce manuel est disponible en français à
www.stoneagemanufacturing.com
.
This manual is available in French at
www.stoneagemanufacturing.com
.
NA42IND
Front View
Side
Cutaway
View
Figure 1. NA42IND Fireplace Assembly
& Cutaway View
Содержание NA42IND
Страница 13: ...13...
