manualshive.com logo in svg

Stoll CMS 730 S, Руководство по эксплуатации

Поделиться
Скачать
Stoll CMS 730 S Скачать руководство пользователя страница 404

Software - Installation and basic settings  

8 

Boot process  8.1 

400

Load the machine settings in 

the machine computer 

The machine settings do not only contain the machine data, but also the 
machine options, the machine configuration, the report, the network 
settings, and other internal control information. This data is referred as 

Dongle

. Dongle-Data are saved in a file with the 

mcnumber.dgl

 

(mcnumber = machine number) name.

✔

A file with dongle data is available.

1. Tap the "Load Dongle" key.

A selection window for opening a file is displayed.

2. Select Dongle-file (mcnumber.dgl).

3. Confirm input.

4. When the network settings are available, the question appears whether 

these should be read also. If you answer this question with "Yes" the 
network settings are loaded and a Reboot is automatically run.

The machine settings are copied to the machine. After the copying is 
complete, a message appears.

Saving dongle data 

The machine settings do not only contain the machine data, but also the 
machine options, the machine configuration, the report, the network 
settings, and other internal control information. This data is referred as 

Dongle

. Dongle-Data are saved in a file with the 

mcnumber.dgl

 

(mcnumber = machine number) name. It is important to back up the data, 
e.g. when the hard disk is replaced.

1. Tap on the key "Save Dongle".

A selection window for saving a file is displayed.

2. Select the saving location.

3. Confirm input.

The machine settings are copied on the target medium (file name: 
mcnumber.dgl).

The current machine settings will be overwritten!

When you copy the machine settings to the hard disk, the 
current machine settings are overwritten.

Only carry out the following steps if you want to replace the 
current machine settings with the settings saved on the file.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды