Stoll CMS 730 S, Руководство по эксплуатации

Страница: 219 / 468

215
4
Adjusting knitting machine
4.2 Advanced adjustments
4.2.28 Plating - Plating yarn carrier carriage
Not for CMS 520 C, CMS 830
C
Two yarn carriers which differ depending on the engaging width (1) on the
yarn carrier carriage, are used for plating with normal yarn carriers. The
engaging width is adjustable individually (23-46 mm) on this yarn carrier
carriage.
Combination possibilities of the yarn carriers:

2 plating yarn carrier carriages

1 standard yarn carrier, and 1plating yarn carrier carriage
Example for a plating pattern

Colored plating pattern
Clamping and cutting bed
2x16
When using 16 times clamping / cutting, every other clamping / cutting point
has to be deactivated to ensure that both threads are reliably clamped and
cut.
Carry out the settings in the "Machine Configuration 2" window.

(BootOkc --> Restart and Configuration --> Machine configuration 2)

Setting: 2x16/8
The light, visible yarn on the fabric front side is the plating yarn (yarn carrier with
the smaller engaging width)
The dark yarn is the basic yarn (yarn carrier with the larger engaging width)
When an elastic thread is knitted, it is said that it is plated
which is technologically not quite correct. The yarn is actually
knitted with the plating process, and from the technological
point of view, the elastic thread is the basic yarn, and the
visible one is the plating yarn.