Stoll CMS 502 HP+ Скачать руководство пользователя страница 58

Страница: 58 / 562

Description of knitting machine

Display and operating elements

2.8 Display and operating elements

Main switch

2.8.1 Main switch

Main switch (5xx)

Main switch

The main switch (1) is located on the front of the machine above the right

control unit.
In position "1 - On" the main switch is switched on, in position "0 - Off" it is

switched off.

Switch-off process When the main switch is turned from "1" to "0", the machine is immediately

switched off. Dangerous movements are immediately stopped. However, the

machine data are not lost, as they are saved with a battery. This takes approx.

60 seconds. In the process, messages appear on the touch screen. Once the

process is complete, the touch screen becomes dark.
Even with the main switch switched off, the mains supply up to the main switch

still carries current with extremely high voltage. The mains supply must be

disconnected and secured against being switched on again before working on

the main switch unit.

Emergency-stop

The main switch is also the emergency-stop switch.
The main switch has to be locked during maintenance and service work. This

prevents the main switch from being switched on accidentally.

Содержание CMS 502 HP+



















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды

Stoll CMS 502 HP+, Руководство по эксплуатации

Результаты поиска

Содержание CMS 502 HP+

Отзывы:

Похожие инструкции для CMS 502 HP+

Бренды по названию

Популярные бренды