Stoll CMS 502 HP+, Руководство по эксплуатации

Страница: 27 / 562

27
Description of knitting machine
2
Components of the knitting machine
Rear side *
2.1.4 Rear side *
Overview machine elements 5
Label Explanation
1 Carriage It moves over the needle beds. It controls the
work positions of each yarn carrier and each
and every needle in the needle bed.
2 Rear needle bed Every machine has a front and a rear needle
bed. There are grooves in the needle bed
which are run by needles.
3 Trailing cable (energy
chain)
The cables for the carriage that travels hence
and forth are fed along with in the energy
chain.
4 Transformer (Fuses) The knitting machine can be operated with
various mains voltages.
5 Fluff absorption The fluff absorption removes the yarn fluff
from the upper area of the needle beds.
6 Control Unit
(CMS 530, CMS 520,
CMS 520 C, CMS 502)
It controls the knitting process.
It saves the data of the knitting program.
It controls the needle selection and the
motors in the carriage.
Control (right-hand side
of the machine)
(CMS 830 C, CMS 822,
CMS 740)
It controls the carriage run and the racking of
the needle bed.
7 Main Drive The carriage is driven by the drive motor via a
toothed belt.