Stocks AG Fan Jet Mini 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 13 / 23

13
12.1 Electrical Components
12.2 Electrical Connections
Power requirement is 12 volts with a minimum continuous 30amp supply.
The Fan Jet is supplied with a control console and all wiring
Ensure the power supply cable (2) is connected direct to the vehicle battery to ensure maximum power.
Connect the positive wire (fused) to the positive (+) terminal and negative earth connection to the negative (-)
terminal.
NOTE t
he disc should rotate in a clockwise direction when viewed from above.
Control extension cables available (please enquire)
WARNING
Failure to connect to the vehicle battery may result in control function problems and possi-
ble damage to the vehicle battery and charging system must be in good condition to achieve the best results.
All cables and controls are fitted with matching plugs and sockets.
WARNING
any modification to the wiring, fuse holder or controls will invalidate any warranty
claim and may affect the performance of the Fan Jet.
Always replace any blown fuse with the same amp rated blade type fuse as the original one fitted.
1. FJ110B Control Panel
2. FJ107D 5m Fused Power Cable
3. FJ108D 6m Control Connector Cable
4. FJ109D Tail Piece
5. FJ055A 12v Toggle Switch
6. FJ057D Disc Motor
6. MM044C Feed Motor
6
1
2
3
4
7
6
5