2 | User information
STOBER
6
05/2018 | ID 442461.04
2
User information
This manual describes the MC6 motion controller. It provides you with relevant information
about connecting and installing as well as commissioning. The target group of this manual is
specialists with knowledge of PLC and CODESYS programming.
2.1
Storage and transfer
As this documentation contains important information for handling the product safely and
efficiently, it must be stored in the immediate vicinity of the product until product disposal and be
accessible to qualified personnel at all times.
Also pass on this documentation if the product is transferred or sold to a third party.
2.2
Described product type
This documentation is binding for:
MC6 motion controller in hardware version 1 or later and software version C or later, in
combination with AS6 AutomationControlSuite software in Version 3.5.9.20 or later.
2.3
Timeliness
Check whether this document is the most up-to-date version of the documentation. We provide
the latest document versions for our products for download on our website:
http://www.stoeber.de/en/download
2.4
Original language
The original language of this documentation is German; all other language versions are derived
from the original language.
2.5
Limitation of liability
This documentation was created taking into account the applicable standards and regulations
as well as the current state of technology.
STOBER shall assume no responsibility for damage resulting from failure to comply with the
documentation or from use that deviates from the intended use of the product. This is especially
true for damage caused by individual technical modifications to the product or projecting and
operation of the product by unqualified personnel.