manualshive.com logo in svg

Stober MC6, Руководство пользователя, Страница: 56 / 82

Поделиться
Скачать
Stober MC6 Скачать руководство пользователя страница 56

8 | Commissioning

STOBER

56

05/2018 | ID 442461.04

7. Highlight the CiA object for which you would like to extend PDO transmission and confirm

with 

OK

.

If the desired CiA object is not included in the directory, enter its index and subindex in the

corresponding fields (if necessary, calculate both indices as described in the chapters

Manufacturer-specific parameters: 2000 hex – 53FF hex and Manufacturer-specific

parameters: A000 hex – D3FF hex). 

Also select the data type that matches the data type of the drive controller parameter and

confirm with 

OK

.

ð

The selected CiA object or the specified drive controller parameter has been added to
the PDO content of the selected channel.

8. Repeat steps 6 – 7 for all other CiA objects for which you would like to extend PDO

transmission for the selected channel.

9. Switch to the associated DriveControlSuite project and add to the PDO transmission there

in the same way as the additions in AS6 (see Configuring PDO transmission).

ð

The expansion of PDO transmission takes effect the next time the EtherCAT master is
started.

Содержание MC6



















































































Отзывы:

Нет отзывов