Stober MC6 Скачать руководство пользователя страница 54

Страница: 54 / 82

8 | Commissioning

STOBER

05/2018 | ID 442461.04

8.2.6

Identifying a MC6 motion controller

1. In the device tree, highlight the

EtherCAT_Master

module and select the menu

Online

The

No active path defined. Do you want to set it?

dialog box opens.

2. Confirm with

Yes

Device

tab >

Communication Settings

opens in the editor window.

3. Click

Scan Network

The

Select Device

dialog box opens.

Select the network path to the controller

Identify the MC6 motion controller by its device name, highlight it and confirm with

The selected MC6 motion controller is active.

8.2.7

Transmitting a project configuration

Transfer the entire project configuration to the motion controller.

1. In the device tree, navigate to

Device (STOEBER MC6 (AS6))

and double click to open it.

Device

tab >

Communication Settings

opens.

If you want to disable searching for a DHCP server on the network when starting the
motion controller, enter a fixed IP address (see the MC6 motion controller manual). This
makes it faster to connect to the motion controller after a restart.

2. Select the menu

Online

3. Confirm the warning notification.

4. To start the controller, select the menu

Debug

Start

The EtherCAT network is ready for operation.

Содержание MC6



















































































Результаты поиска

Содержание MC6

Отзывы:

Stober MC6, Руководство пользователя, Страница: 54 / 82

Результаты поиска

Содержание MC6

Отзывы: