Stober EZ, Руководство пользователя

Страница: 30 / 460

2.5.5 Position of the plug connectors/terminal box
In the standard version, the plug connectors of the motor or the terminal box/plug connectors of the motor
adapter are mounted in the 270° position (in relation to the oil drain plug (1) of the planetary gear unit). The
position of the terminal box/plug connector of the motor adapter can be selected separately from the posi-
tion of the motor plug connectors.
Indicate variations for your geared motor in the order.
2.5.6 Other product features
Feature Value
Max. permitted gear unit temperature (on the surface of the gear unit) ≤ 90 °C
Paint Black RAL 9005
Explosion-proof design in accordance with (ATEX) Directive 2014/34/EU
(optional) Not available
Efficiency:
η
get
single-stage
η
get
two-stage
97%
95%
Protection class:
2
Gear unit
Motor IP65
IP56, optionally IP66
2.5.7 Direction of rotation
The input and output rotate in the same direction.
2.6 Project configuration
Project your drives using our SERVOsoft designing software. Download SERVOsoft for free at https://
www.stoeber.de/en/ServoSoft .
It is the most convenient and reliable method of drive selection, as the entire torque/speed curve of the ap-
plication is displayed and evaluated here in the curve of the geared motor.
In this chapter, only limit values for specific operating points can be taken into consideration for manual
drive selection.
An explanation of the formula symbols can be found in Chapter Symbols in formulas.
The formula symbols for values actually present in the application are marked with *.
2
Observe the protection class of all the components.
2.6 Project configuration 2 P planetary geared motors
30