DocID029822 Rev 1
17/23
UM2119
SPC560P-DISP: Load Firmware
21
6
SPC560P-DISP: Load Firmware
To use the STSW-L9907-H GUI a dedicated FW (file name: “GP-Pictus.elf”) must be loaded
on the microcontroller in the SPC560P-DISP board following the below procedure (the
board is supplied by the USB cable thus the external PSU is not required):
1.
Run “UDE Visual Platform”;
Figure 18. UDE Visual Platform icon
2.
Create a New Workspace for SPC560P-DISP. Click File>New Workspace
Figure 19. UDE Visual Platform: File and New Workspace
3.
Name the new Workspace i.e.
Pictus
then select OPEN
