STMicroelectronics ST7MDTULS-EVAL, Руководство пользователя

Страница: 3 / 18

October 2007 Rev 2 1/15
UM0068
User manual
ST7MDTULS-EVAL
ST7 USB low-speed evaluation board
Introduction
The objective of the ST7MDTULS-EVAL evaluation board is to provide a complete USB
application package using a Windows-based host software application and one of ST’s
range of USB low-speed microcontrollers acting as a peripheral device. The host software
and the ST7 source code provide an easily-understood example of how to exchange data
using the HID (human interface devices) class protocols. The firmware supplied on the ST7
devices is based on a USB core library that makes the control of all the USB interface
hardware transparent to the application developer. This USB library, developed by
STMicroelectronics and plug-tested by the USB IF (implementers forum), is intended for you
to use as a toolbox. All the documentation you need to do this is supplied with the package.
The ST7MDTULS-EVAL evaluation board incorporates basic input sources such as push-
buttons, an analog trimmer and output sources (LEDs). It also has a wire-wrap area so that
you can easily develop your own application. An external 12 V charge pump is also
provided, to allow you to program the ST7 embedded Flash program memory using in-
application programming (IAP). The following development tools can be ordered separately:
assembler, linker, C compiler, source level debugger, hardware emulator, programming
boards and gang programmer. For ordering information, see our website at www.st.com or
contact your local sales office.
www.st.com