STMicroelectronics P-NUCLEO-LRWAN2, Руководство пользователя

Страница: 41 / 55

2. Provide the necessary information:
–
Application ID: choose a unique ID or name made of lower-case, alphanumeric characters and
nonconsecutive
“-” , for example
ttn-handler-eu
– Application
– Description
3. Click on [ Add application ].
Figure 34. The Things Network application overview
4. Click on [ Add end device ].
5. Select the end device type. For example, when using an STM32WL-based device such as the NUCLEO-
WL55JC1 , choose:
– [ Brand ]: STMicroelectronics
– [ Model ]: NUCLEO-WL55JC1
– [ Profile (Region) ]: EU_868_870
6. In the section Enter registration data , provide the necessary information:
– [ Frequency plan ]: select Europe 863-870 MHz (SF9 for RX2 - recommended)
– [ AppEUI ]: select the app EUI of the device
– [ DevEUI ]: enter the device EUI of the device (refer to the device credentials sticker)
– [ AppKey ]: enter the app key of the device (refer to the device credentials sticker)
– [ End device ID ]: choose a unique ID or name
Note: For the US915, AU915, or CN470 configuration, when registering a device, the user must set in the field
[Frequency plan] the same frequency sub band (FSB) as entered during the gateway registration (refer to
Other regions in Section 7.2.1 Gateway registration to The Things Network v3 server ).
UM2587
The Things Network (TTN) v3 server setup
UM2587 - Rev 3
page 41/55