2.
Choose the base platform [
Packet Forwarder STM
]
Figure 27.
ST gateway platform
3.
Fill in the MAC address of the gateway. Refer to
for this information
4.
Fill in the gateway location
5.
Click [
Register Packet Forwarder STM gateway
]
6.
From the Loriot dashboard, select the added gateway to view its detailed information
7.
Edit the channel plan parameter and select the desired region frequency. The P-NUCLEO-LRWAN2
gateway default region frequency is
EU868_Semtech
. The P-NUCLEO-LRWAN3 gateway default region
frequency is
CN470
8.
The gateway status is updated after a few seconds
7.1.2
Device registration to Loriot network server
The device parameters are needed to enroll the device, depending on the join-mode setting of the device.
Follow the procedure below to enroll the sensor device:
1.
Go to [
Loriot Dashboard
]>[
Application
]>[
SampleApp
]>[
Enroll Device
]
2.
Select the correct enrollment process of the device. The default enrollment is
OTAA
.
3.
Fill in all necessary information. Refer to the credentials on the device sticker:
DevEUI
,
AppEUI
and
AppKey
4.
Click [
Enroll
]
5.
Once enrolled, the device is visible in the device list in menu [
Devices
]
6.
Reset the device to allow the device to join the network especially for OTAA devices.
UM2587
Loriot network server setup
UM2587
-
Rev 3
page 35/55
