STMicroelectronics L6364W, Руководство пользователя

Страница: 2 / 20

1 Getting started
1.1 Features
• Kit content:
–
STEVAL-IOD004V1 (45.8 x 8.3 mm) main board with shape easy to be integrated in industrial sensors
housing (not available for separate sale)
– STLINK-V3MINI programmer and debugger tool
– M8-M12 industrial connector adapter including a 20 cm cable
– 14-pin flat cable
• Main board features:
– Industrial sensor node based on STM32G071EB (mainstream Arm
®
Cortex
®
-M0+ RISC core MCU
operating at up to 64 MHz frequency), L6364W (dual channel transceiver IC for SIO and IO-Link
sensor applications), IIS2MDC (high accuracy, ultra-low-power, 3-axis digital output magnetometer)
and ISM330DHCX (iNEMO inertial module with machine learning core, and finite state machine with
digital output for industrial applications)
– Runs an IO-Link v.1.1 demo-stack and MEMS control software, included in the companion package
STSW-IOD04K together with the IODD file
– Operating voltage range 7 to 32 V
– Four-pole M8 industrial standard connector
– L6364W embedded DC-DC converter provides 3.3 V supply for all on-board ICs
– General-purpose LEDs for transmission, programming/debugging, warning, and status
– Jumpers for CQ and DIO selection in independent or joint mode
– Switch for transmission mode selection (transparent, single, or multioctet)
– Reset button
– 10-pin connector for sensor expansion options
– SWD connector for debugging and programming capability
– Protections against surge pulse (up to ± 3APK with 500 Ω coupling) and reverse polarity
– EMC and EMI tested according to standard requirements
– RoHS compliant
UM2942
Getting started
UM2942 - Rev 1
page 2/20