background image

Introduction

The 

B-L462E-CELL1

 Discovery kit is a turnkey development platform for cellular IoT devices. The Discovery kit contains a

low-power Discovery main board powered by an LBAD0ZZ1SE module, a global coverage antenna, and a fan-out board.
The LBAD0ZZ1SE module includes an 

STM32L462REY6TR

 microcontroller, an LBAD0XX1SC-DM ultra-small LTE Cat M/NB

modem, and an ST4SIM-200M GSMA-certified embedded SIM with a prepaid cellular connectivity data plane. ST4SIM-200M
can also be used as an embedded secure element (eSE) for application.

STMod+ and extended pins connectivity provide unlimited expansion capabilities with a large choice of specialized add-on
boards. Moreover, the fan-out board supports add-on boards using mikroBUS

, ESP

01, Grove I

2

C, Grove UART, and

breadboard. The B-L462E-CELL1 Discovery kit includes an ST-LINK debugger/programmer and comes with the comprehensive
STM32Cube software libraries together with packaged software examples to demonstrate end-to-end connectivity.
This document provides information about the Discovery kit hardware features and instruction to run the demonstration
application software.

Figure 1. 

B-L462E-CELL1 Discovery kit for IoT nodes

Picture is not contractual.

Discovery kit for LTE Cat M/NBIoT with STM32L4 Series

UM2743

User manual

UM2743

 - 

Rev 1

 - 

March 2021

For further information contact your local STMicroelectronics sales office.

www.st.com

Содержание B-L462E-CELL1



























































Отзывы: